DYNAMIC STD LOCKING FACILITY

Use Dynamic Locking Facility to Control Access from your Telephone

Please check with the DE ( Intl ) and ascertain the type of your Exchange.

FUNCTION	E10B & OCB Exchanges DIAL	EWSD Exchanges DIAL
i) Password Registration	123 xxxx xxxx xxxx :dial twice you r4 digit password	123 0000 xxxx xxxx : your 4 digit password
ii) Allow all Calls	124 xxxx 0
iii) Bar only STD Calls	124 xxxx 1
iv) Bar STD Trunk (180) & Internet (172) Calls	124 xxxx 2
v) Allow NSD, Cellular, Local & Trunk Calls	124 xxxx 3
vi) Bar all Out going Calls	124 xxxx 4
vii) Allow Local but Bar Cellular Calls	124 xxxx 5
viii) Change your Password	123 xxxx yyyy Where, xxxx : Existing Password & yyyy : New Password.

Note : Functions (ii) and (v) are not possible from STD Barred Telephone.

Dynamic Locking from ISDN Phone Line

This facility is available only to ISDN subscribers of EWSD exchanges.
The procedure is similar as above, but instead of 123 you will have to dial H 23 and
instead of 124, you will have to dial H 24. Also, each set of digits has to be
separated with the digit H. The dialing has to be finished with #.

e.g. to bar STD + Trunk calls + Internet calls from an ISDN line, you will have to dial H 24 H xxxx H 2 #.